- Used as heavy duty pump for handling all
types of hydrocarbons and inorganic products
|
- A suitable for handling clean or slightly
contaminated, non-aggressive liquids in munipicial and industrial heating, water
supply, booster, and recycling plants
|
Performance
Range
- Capacity
: up to 1250 m³/h
- Head
: up to 100 m
- Discharge
Flange : Ø 150 - 300 mm
- Operating
Pressure : up to 16 kg/cm²
- Operating
Temperature : up to 140ºC
|
|
Construction
Horizontal
single stage, single suction centrifugal pumps of the process type designed to
DIN 24555 with higher capacity levels.
Hydraulically
balanced through back vanes or for larger diameters through balance holes.
Supporting
bearings as oil or grease lubricated antifriction bearings and shaft sealing by
means of stuffing box or mechanical seals.
Easy
maintenance by rear pull-out feature without disconnection of pipework.
Installation
Horizontal
with direct coupled motor. Vertical wet pit or dry installation on request.
Standard
Materials
| Volute
Casing : Cast Iron (gray/nodular) |
| Impeller
: Cast Iron / Bronze |
| Pump
Shaft : Cr-steel |
